Advances in New and Renewable Energy >
Research Process on Erosion Wear of Wind Turbine Blade Coating by Wind-borne Sands
Received date: 2015-08-11
Revised date: 2015-09-16
Online published: 2015-10-30
As the declining of fossil resources, wind power technology was vigorously developed in recent years. There are huge wind resources in the mid-west of the Inner Mongolia Autonomous Region, but the poor surrounding environment, such as solid particles in the wind badly eroded the high speed wind blades. The erosion of blade coating increased the costs of operation and maintenance. In this paper, the erosion wear researches of coating materials at home and abroad were reviewed. The influences of various factors to the abrasion loss, stress and strain distribution rule and wear mechanisms of coating materials were discussed. This review may provide some ideas and prospects for the research of erosion wear process of wind turbine blade coating.
Key words： wind-borne sands; wind turbine; blade coating; erosion wear
ZHANG Yong , LIU Zhao , HUANG Chao , TIAN Yue , LIU Wen-fei . Research Process on Erosion Wear of Wind Turbine Blade Coating by Wind-borne Sands[J]. Advances in New and Renewable Energy, 2015 , 3(5) : 331 -335 . DOI: 10.3969/j.issn.2095-560X.2015.05.002
[1] 中国可再生能源学会风能专业委员会. 2014年中国风电装机容量统计[J]. 风能, 2015(2): 36-49.
[2] 赵靓. 2014年中国风电开发主要数据汇总[J]. 风能, 2015(3): 34-36.
[3] 徐涛. 2014年中国风电装机容量统计[C]//中国农机工业协会风能设备分会. 《风能产业》, 2015(4): 14-18.
[4] DALILI N, EDRISY A, CARRINEAU R. Review of surface engineering issues critical to wind turbine performance[J]. Renewable and Sustainable Energy Reviews, 2009, 13: 428-438.
[5] 陈利英, 李吉才. 乌兰察布地区主要气象灾害及其发生频率[J]. 内蒙古农业科技, 2013(5): 80-83.
[6] 丁凯, 刘吉平. 近50年中国北方沙尘暴空间分布格局的动态变化研究[J]. 干旱区资源与环境, 2011, 25(4): 116-120.
[7] 张彦峰. 风电场运行与检修维护管理[J]. 风电技术, 2013(1): 61-65.
[8] 贾艳华. 风机叶片涂层微观结构与动态力学性能研 究[J]. 中国涂料, 2010, 25(7): 35-40.
[9] 杨春燕, 翟欢, 熊杰, 等. 风电叶片保护涂层的现状及应用[J]. 中国新技术新产品, 2011(17): 153.
[10] 鲁嘉华, 凌志光. 气固两相透平叶片冲蚀特性的气动试验研究[J]. 流体力学实验与测量, 2003, 17(2): 63-69.
[11] 郝贠洪, 邢永明, 杨诗婷. 风沙环境下钢结构表面涂层冲蚀行为与侵蚀机理研究[J]. 摩擦学学报, 2010, 30(1): 26-31.
[12] BARKOULA N M, KARGER-KOCSIS J. Processes and influencing parameters of the solid particle erosion of polymers and their composites: a review[J]. Journal of Materials Science, 2002, 37(18): 3807-3820.
[13] HARSHA A P, TEWARI U S, VENKATRAMAN B. Solid particle erosion behaviour of various polyaryletherketone composites[J]. Wear, 2003, 254: 693-712.
[14] TEWARI U S, HARSHA A P, HAGER A M, et al. Solid particle erosion of carbon fiber and glass fiber-epoxy composites[J]. Composites Science and Technology, 2003, 63: 549-557.
[15] ARJULA S, HARSHA A P. Study of erosion efficiency of polymers and polymer composites[J]. Polymer Testing, 2006, 25(2): 188-196.
[16] SURESH A, HARSHA A P, GHOSH M K. Solid particle erosion studies on polyphenylene sulfide composites and prediction on erosion data using artificial neural networks[J]. Wear, 2009, 266(1/2): 184-193.
[17] ZHANG Z, FRIEDRICH K, VELTEN K. Prediction on tribological properties of short fiber composites using artificial neural networks[J]. Wear, 2002, 252: 668-675.
[18] ZHANG Z, FRIEDRICH K. Artificial neural network applied to polymer composites: a review[J]. Composites of Science and Technology, 2003, 63: 2029-2044.
[19] ZHANG Z, BARKOULA N M, KARGER-KOCSIS J, et al. Prediction of erosive wear properties of polymers using artificial neural networks[J]. Wear, 2003, 255: 708-713.
[20] 鲍崇高, 付平安. 碳钢不锈钢材料抗冲蚀磨损性能研究[J]. 铸造技术, 2009, 30(1): 23-25.
[21] 高雪松, 黄因慧, 田宗军, 等. 钛合金表面激光熔覆等离子体喷涂Al2O3+13%TiO2涂层冲蚀磨损性能[J]. 中国激光, 2010, 37(3): 858-862.
[22] EDWARDS J K, MCLAURY B S, SHIRAZI S A. Evaluation of alternative pipe bend ?ttings in erosive service: Proceedings of 2000 ASME ?uids engineering summer meeting[C]. June 11-15, 2002, Boston, MA: Paper no. FEDSM2000-11245.
[23] AHLERT K R. Effects of particle impingement angle and surface wetting on solid particle erosion onANSI 1018 steel[D]. MSthesis, University of Tulsa, USA. 1994.
[24] FERREIRA C G, CIAMPINI D, PAPINI M. The effect of inter-particle collisions in erosive streams on the distribution of energy ?ux incident to a ?at surface[J]. Tribology International, 2004, 37: 791-807.
[25] PAPINI M, CIAMPINI D, KRAJAC T, et al. Computer modelling of interference effects in erosion testing: effect of plume shape[J]. Wear, 2003, 255(1/6): 85-97.
[26] WU C, LI L, THORNTON C. Rebound behaviour of spheres for plastic impacts[J]. International Journal of Impact Engineering, 2003, 28: 929-946.
[27] KARAZ A H, GORHAM D A. A study of the restitution coef?cient in elastic-plastic impact[J]. Philosophical Magazine Letters, 2000, 80: 549-559.
[28] MOLINARI J F, ORTIZ M. A study of solid-particle erosion of metallic targets[J]. International Journal of Impact Engineering, 2002, 27: 347-358.
[29] KLEIS I, HUSSAINOVA I. Investigation of particle-wall impact process[J]. Wear, 1998, 233-235: 168-173.
[30] PATTAIK A, SATAPATHY A, MAHAPATRA S S, et al. A modelling approach for prediction of erosion behaviour of glass ?ber-polyester composites[J]. Journal of Polymer Research, 2003, 15(2): 147-160.
[31] PATNAIK A, SATAPATHY S S, MAHAPATRA R R. Dash, Tribo-performance of polyester hybrid composites: damage assessment and parameter optimization using Taguchi design[J]. Materials and Design, 2009, 30: 57-67.
[32] SOURAY B. Modeling And Simulation Of Solid Particle Erosion Of Protective Films[D]. Texas A&M University, 2010.
[33] 张义. 管道内气固两相流磨损与腐蚀特性研究[D]. 长沙: 中南大学, 2011.
[34] 赵新学. 气固两相流对旋风分离器壁面磨损机理的研究[D]. 山东 东营: 中国石油大学, 2010.
[35] 梅丹, 幸福堂. 气固两相流风机磨损率的数值预测研究[J]. 流体机械, 2007, 35(10): 25-28.
[36] 江茂强, 赵永志, 郑津洋. 流化床内埋管磨损特性的数值模拟研究[J]. 过程工程学报, 2009(S2): 891-894.
[37] 郝贠洪, 朱敏侠, 靳铁, 等. 风沙粒子冲击钢结构涂层力学行为的理论与有限元分析[J]. 应用力学学报, 2014(6): 830-835; 989.
[38] 郝贠洪, 邢永明, 杨诗婷, 等. 风沙环境下钢结构涂层的冲蚀磨损力学性能研究[J]. 应用力学学报, 2013, 30(3): 350-355; 473.
[39] 郝贠洪, 邢永明, 冯玉江, 等. 钢结构表面涂层材料抗风沙冲蚀力学性能研究[J]. 建筑材料学报, 2013, 16(6): 1092-1096.
/
| 〈 |
|
〉 |