Research Progress of All-Inorganic Perovskite Solar Cells

LIU Hong-sha; HUAN Chang-meng; XIAO Xiu-di; BI Zhuo-neng; LU Yuan; QI Shuai; ZHAN Yong-jun; XU Xue-qing; XU Gang

doi:10.3969/j.issn.2095-560X.2019.02.005

Advances in New and Renewable Energy >

2019 , Vol. 7 >Issue 2: 142 - 148

DOI: https://doi.org/10.3969/j.issn.2095-560X.2019.02.005

Research Progress of All-Inorganic Perovskite Solar Cells

LIU Hong-sha ,
HUAN Chang-meng ,
XIAO Xiu-di ,
BI Zhuo-neng ,
LU Yuan ,
QI Shuai ,
ZHAN Yong-jun ,
XU Xue-qing ,
XU Gang

Expand

1. Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China;
2. University of Chinese Academy of Sciences, Beijing 100049, China;
3. University of Science and Technology of China, Hefei 230031, China;
4. Nano Science and Technology Institute, University of Science and Technology of China, Suzhou 215123, Jiangsu, China

Received date: 2018-10-13

Revised date: 2018-11-13

Online published: 2019-04-30

Fold

Abstract

Perovskite solar cells is a kind of emerging all-solid-state planar solar cell and grew rapidly since its first appearance in 2009. It was reported that the photoelectric conversion efficiency of organic-inorganic hybrid perovskite solar cells has exceeded 24%, and the photoelectric conversion efficiency of all inorganic perovskite solar cells exceeded 17%. Compared with organic-inorganic hybrid perovskite solar cells, the thermostability of inorganic perovskite materials was higher, which makes it a hotspot in the research field of perovskite solar cells. In this paper, the latest research progress of all-inorganic perovskite solar cells was mainly reviewed, especially the improvement of the efficiency and stability of the all-inorganic perovskite solar cell types. The improvement of the perovskite film layer, results of optimizing the electronic transport layer and hole transport layer were described and reviewed in detail.

Key words： perovskite solar cells; stability; photoelectric conversion efficiency; electronic transport layer; hole transport layer

Cite this article

LIU Hong-sha , HUAN Chang-meng , XIAO Xiu-di , BI Zhuo-neng , LU Yuan , QI Shuai , ZHAN Yong-jun , XU Xue-qing , XU Gang . Research Progress of All-Inorganic Perovskite Solar Cells[J]. Advances in New and Renewable Energy, 2019 , 7(2) : 142 -148 . DOI: 10.3969/j.issn.2095-560X.2019.02.005

References

[1] 徐晓霞. TiO₂及SnO₂基电子传输层的低温制备及其在钙钛矿太阳能电池中的应用研究[D]. 泉州: 华侨大学, 2018.
[2] HOU J G, CAO S Y, WU Y Z, et al.Inorganic colloidal perovskite quantum dots for robust solar CO₂ reduction[J]. Chemistry: A European journal, 2017, 23(40): 9481-9485. DOI: 10.1002/chem.201702237.
[3] STOUMPOS C C, MALLIAKAS C D, PETERS J A, et al.Crystal growth of the perovskite semiconductor CsPbBr₃: a new material for high-energy radiation detection[J]. Crystal growth & design, 2013, 13(7): 2722-2727. DOI: 10.1021/cg400645t.
[4] SANCHEZ R S, DE LA FUENTE M S, SUAREZ I, et al. Tunable light emission by exciplex state formation between hybrid halide perovskite and core/shell quantum dots: implications in advanced LEDs and photovoltaics[J]. Science advances, 2016, 2(1): e1501104. DOI: 10.1126/ sciadv.1501104.
[5] DUAN J L, ZHAO Y Y, HE B L, et al.High-purity inorganic perovskite films for solar cells with 9.72% efficiency[J]. Angewandte chemie international edition, 2018, 57(14): 3787-3791. DOI: 10.1002/anie.201800019.
[6] DAR M I, ABDI-JALEBI M, ARORA N, et al.Understanding the impact of bromide on the photovoltaic performance of CH₃NH₃PbI₃ solar cells[J]. Advanced materials, 2015, 27(44): 7221-7228. DOI: 10.1002/adma. 201503124.
[7] ZEN Q S, ZHANG X Y, FENG X L, et al.Polymer-passivated inorganic cesium lead mixed-halide perovskites for stable and efficient solar cells with high open-circuit voltage over 1.3V[J]. Advanced materials, 2018, 30(9): 1705393. DOI: 10.1002/adma.201705393.
[8] LIN J, LAI M L, DOU L T, et al.Thermochromic halide perovskite solar cells[J]. Nature materialsvolume, 2018, 17(3): 261-267. DOI: 10.1038/S41563-017-0006-0.
[9] STAVRINADIS A, PRADHAN S, PAPAGIORGIS P, et al.Suppressing deep traps in PbS colloidal quantum dots via facile iodide substitutional doping for solar cells with efficiency >10%[J]. ACS energy letters, 2017, 2(4): 739-744. DOI: 10.1021/acsenergylett.7b00091.
[10] RIPOLLES T S, NISHINAKA K, OGOMI Y, et al.Efficiency enhancement by changing perovskite crystal phase and adding a charge extraction interlayer in organic amine free-perovskite solar cells based on cesium[J]. Solar energy materials and solar cells, 2016, 144: 532-536. DOI: 10.1016/j.solmat.2015.09.041.
[11] WANG P Y, ZHANG X W, ZHOU Y Q, et al.Solvent-controlled growth of inorganic perovskite films in dry environment for efficient and stable solar cells[J]. Nature communications, 2018, 9: 2225. DOI: 10.1038/ s41467-018-04636-4.
[12] CHEN C Y, LIN H Y, CHIANG K M, et al.All- Vacuum-deposited stoichiometrically balanced inorganic cesium lead halide perovskite solar cells with stabilized efficiency exceeding 11%[J]. Advanced materials, 2017, 29(12): 1605290. DOI: 10.1002/adma.201605290.
[13] MA Q S, HUANG S J, WEN X M, et al.Hole Transport layer free inorganic CsPbIBr₂ perovskite solar cell by dual source thermal evaporation[J]. Advanced energy materials, 2016, 6(7): 1502202. DOI: 10.1002/aenm.201502202.
[14] SWARNKAR A, MARSHALL A R, SANEHIRA E M, et al.Quantum dot-induced phase stabilization of α-CsPbI₃ perovskite for high-efficiency photovoltaics[J]. Science, 2016, 354(6308): 92-95. DOI: 10.1126/science.aag2700.
[15] SANEHIRA E M, MARSHALL A R, CHRISTIANS J A, et al. Enhanced mobility CsPbI₃ quantum dot arrays for record-efficiency, high-voltage photovoltaic cells[J]. Science advances, 2017, 3(10): eaao4204. DOI: 10.1126/ sciadv.aao4204.
[16] DUTTA A, DUTTA S K, DAS ADHIKARI S, et al.Phase-stable CsPbI₃ nanocrystals: the reaction temperature[J]. Angewandte chemie international edition, 2018, 29(57): 9083-9087. DOI: 10.1002/anie.201803701.
[17] EPERON G E, PATERNÒ G M, SUTTON R J, et al.Inorganic caesium lead iodide perovskite solar cells[J]. Journal of materials chemistry A, 2015, 39(3): 19688-19695. DOI: 10.1039/C5TA06398A.
[18] LI Z, YANG M J, PARK J S, et al.Stabilizing perovskite structures by tuning tolerance factor: formation of formamidinium and cesium lead iodide solid-state alloys[J]. Chemistry of materials, 2016, 28(1): 284-292. DOI: 10.1021/acs.chemmater.5b04107.
[19] LIU C, LI W Z, ZHANG C L, et al.All-inorganic CsPbI₂Br perovskite solar cells with high efficiency exceeding 13%[J]. Journal of the American chemical society, 2018, 140(11): 3825-3828. DOI: 10.1021/jacs.7b13229.
[20] DUAN J L, ZHAO Y Y, HE B L, et al.Simplified perovskite solar cell with 4.1% efficiency employing inorganic CsPbBr₃ as light absorber[J]. Small, 2018, 14(20): 1704443. DOI: 10.1002/smll.201704443.
[21] YIN W J, YAN Y F, WEI S H.Anomalous alloy properties in mixed halide perovskites[J]. The journal of physical chemistry letters, 2014, 5(21): 3625-3631. DOI: 10.1021/jz501896w.
[22] BEAL R E, SLOTCAVAGE D J, LEIJTENS T, et al.Cesium lead halide perovskites with improved stability for tandem solar cells[J]. The journal of physical chemistry letters, 2016, 7(5): 746-751. DOI: 10.1021/acs.jpclett. 6b00002.
[23] MARSHALL A R, YOUNG M R, NOZIK A J, et al.Exploration of metal chloride uptake for improved performance characteristics of PbSe quantum dot solar cells[J]. The journal of physical chemistry letters, 2015, 6(15): 2892-2899. DOI: 10.1021/acs.jpclett.5b01214.
[24] OGOMI Y, MORITA A, TSUKAMOTO S, et al.CH₃NH₃Sn_XPb₍₁-_X)I₃ perovskite solar cells covering up to 1060 nm[J]. The journal of physical chemistry letters, 2014, 5(6): 1004-1011. DOI: 10.1021/jz5002117.
[25] LI N, ZHU Z L, LI J W, et al.Inorganic CsPb₁-_XSn_XIBr₂ for efficient wide-bandgap perovskite solar cells[J]. Advanced energy materials, 2018, 8(22): 1800525. DOI: 10.1002/aenm.201800525.
[26] YANG F, HIROTANI D, KAPIL G, et al.All-inorganic CsPb₁-_XGe_XI₂Br perovskite with enhanced phase stability and photovoltaic performance[J]. Angewandte chemie international edition, 2018, 57(39): 12745-12749. DOI: 10.1002/anie.201807270.
[27] SLAVNEY A H, HU T, LINDENBERG A M, et al.A bismuth-halide double perovskite with long carrier recombination lifetime for photovoltaic applications[J]. Journal of the American chemical society, 2016, 138(7): 2138-2141. DOI: 10.1021/jacs.5b13294.
[28] LIU C, HU M M, ZHOU X Y, et al.Efficiency and stability enhancement of perovskite solar cells by introducing CsPbI₃ quantum dots as an interface engineering layer[J]. NPG Asia materials, 2018, 10(6): 552-561. DOI: 10.1038/s41427-018-0055-0.
[29] YAN L, XUE Q F, LIU M Y, et al.Interface engineering for all-inorganic CsPbI₂Br perovskite solar cells with efficiency over 14%[J]. Advanced materials, 2018, 30(33): 1802509. DOI: 10.1002/adma.201802509.
[30] DING J, ZHAO Y Y, DUAN J L, et al.Alloy-controlled work function for enhanced charge extraction in all-inorganic CsPbBr₃ perovskite solar cells[J]. ChemSusChem, 2018, 11(9): 1432-1437. DOI: 10.1002/cssc.201800060.

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article

References